Infrasense is back in Wisconsin collecting Infrared and GPR data on a large number of bridge decks throughout the state. We are looking forward to completing projects scheduled throughout the Midwest over the next few months!
Infrasense recently evaluated the condition of 41 bridge decks located in northcentral Wisconsin. The deck evaluations utilized vehicle-based infrared thermography, high-resolution video, and ground penetrating radar. All testing was carried out at a rolling speed, which allowed for spot verification via hammer sounding. Following the field surveys, the data was transferred to Infrasense’s headquarters in…
This past summer, Infrasense surveyed a bridge deck in La Crosse, Wisconsin using infrared for deck delamination detection according to ASTM D 4788 – 03. The equipment setup involved a dedicated vehicle mounted with a high resolution, distance triggered FLIR infrared camera synced up with a high-resolution visual spectrum camera. Both devices capture a whole…
Infrasense completed a ground penetrating radar (GPR) survey to map the reinforcing steel layout and depth along the underside of a bridge deck in Fond du Lac, Wisconsin. The rebar map will be used by the client to assess the load carrying capacity of the structure and ultimately to update the load rating. The GPR…
Impact Echo is another NDE testing technique that Infrasense uses to assess Wisconsin bridge deck condition. In 2014, Infrasense used this testing method in a unique way on the Leo Frigo Bridge, an 8,000-foot long bridge over the Fox River in Green Bay, Wisconsin that typically carries around 40,000 motorists on Interstate 43 each day.…
Infrared thermography is one of our primary testing technologies for Wisconsin bridge deck condition evaluations, and we are always seeking ways to improve our testing methods. In 2017, this research really took flight – literally! Infrasense has also been working with a national aerial imaging company to collect and analyze infrared and visual imagery from…
Infrasense completed a Pilot Study to establish a method for measuring the void space between a decorative fascia wall and a mechanically stabilized earthen (MSE) retaining wall using GPR. Ground-coupled GPR antennas were used to test the abutments of multiple bridges in Green Bay, where these MSE retaining walls are used in the design of…
This past summer, Infrasense conducted a multi-faceted non-destructive survey and report for 17 bridge decks in Wisconsin DOT’s North Central Region. The project provided the client with a comprehensive set of condition results to facilitate a data-driven approach to programming their bridge inventory. Surveys were performed at normal driving speed with no disruption to traffic.…